Stock Photo. Actual item may vary.

LED & Laser Optical Light Sources

 

Introduction:

The FD-FS Series of Optical Light Sources are hand-held, battery-powered, stabilized sources for fiber-optic testing. Together with any Fiberdyne Labs' power meters, this team makes the perfect combination for accurately testing multimode or short-haul single-mode optical fiber systems, cable attenuation, and point-to-point connection verification.
Note:
    The multimode model, FD-FS8513-A, operates at 850/1300nm.
    The single-mode model, FD-FS1316, operates at 1310/1550nm.

 

Features:

• - Low Power Consumption: Each source will operate for more than 20 hours on just two AA batteries.
• - All units include a "Low batt" indicator to monitor the state of its AA batteries.
• - CW,and 2 - KHz Modulation: Users can easily select between continuous wave (CW) or 2 - KHz modulation with the push of a single key.
• - Stable Power: Each unit is factory set to launch at -20dBm with excellent stability over time.
• - Single Key Operation: Ease of operation is provided for by single key entry for wavelength selection, and CW or 2 - KHz modulated frequency.

New York

 

PDF Version of Web page 

 

Fiberdyne Labs Model FD-FS8513-A Dual Port, Dual Wavelength,
LED Light Sources 850nm, & 1300nm,
(Recommended for Multimode Applications)

FD-FS8513-A Optical Connector Dual Port Source Type LED Wavelength (nm) 850+/- 20 1310nm +/- 20 Output Power (dBm) -20.0 dBm into 62.5 Ým Modulation CW, 2kHz Stability +/-0.1dB over 8 hours Battery Life (Alkaline) 80/120 hrs. Output Connector ST, FC, SC Power Two AA-size Alkaline or NiCad (opt.) NiCad Charger (Opt.) 8.7-15 VAC/DC. 150mA, Tip-Positive Operating Temperature -10° to + 40° C Storage Temperature -20° to + 60° C Size 6.5" H x 3.3" W x 1.3" D (160 x 83 x 33 mm) Weight 0.56 lbs. (250 g)

 

Item No. Connector(s) Charger Included Buy FD-FS30851310 ST No Call to Order FD-FS30851312 FC No Call to Order FD-FS30851314 SC No Call to Order

 

Fiberdyne Labs LASER Optical Light Sources Fiberdyne Labs Model FD-FS1316
Single Port, Dual Wavelength, 1310nm & 1550nm, Optical LASER Sources
(Recommended for Single-mode Applications)

 

FD-FS1316 Optical Connector Single Port Source Type Laser Wavelength (nm) 1310, 1550nm Spectral Width (nm) 5 Output Power (dBm) -8 dBm adjustable +/- 1dB Modulation CW, 2kHz, 1kHz, 270Hz Stability +/-0.1dB over 1 hour, +/- 0.2dB over 20 hrs. Battery Life (Alkaline) >20 hrs. continuous use Output Connector ST, FC orSC Power Two AA-size Alkaline or NiCad (opt.) NiCad Charger (Opt.) 8.7-15 VAC/DC, 150mA, Tip-Positive Operating Temperature -10° to + 40° C Storage Temperature -20° to + 60° C Size 6.5" H x 3.3" W x 1.3" D (160 x 83 x 33 mm) Weight 0.56 lbs. (250 g)

 

Item No. Connector(s) Charger Included Buy FD-FS30131602 ST No Call to Order FD-FS30131604 FC No Call to Order FD-FS30131606 SC No Call to Order

 

Item No. Description Buy FD-FC30032241-01 NICAD Battery Charger Kit for Power Meters and Light Sources Call to Order

 

Fiberdyne Labs, Inc.
127 Business Park Drive, Frankfort, New York
Toll Free: 800-894-9694
Phone: 315-895-8470
Fax: 315-895-8436
Email: